This is a test of fluent forms.
PIN April-May 2026
KIN-TEK features the FlexMixer™ – Multi-Gas Blending/Diluting System and the new Span Chek™ 2400 Portable Calibration System.
The FlexMixer™ Multi-Gas Blending/Diluting System mixes or dilutes up to 10 separate gas feeds (or cylinder sources) to one Span Gas output. Controlled by user friendly software installed on the user PC, the FlexMixer™ is an economical and functional solution for a broad range of applications. click for more
The Span Chek™ 2400 is your grab-and-go portable solution for creating accurate, NIST traceable gas standards for calibrating ambient air monitors, detectors, and fence-line systems. It delivers repeatable multi-point concentrations directly at the sensor using up to four Trace Source™ disposable permeation tubes. click for more
Reliable solutions for Analyzers, Detectors, and Sensors
KIN-TEK Analytical, Inc. utilizes Trace Source™ permeation tubes to offer complete solutions for creating custom gases for over 550 gas compounds. Get the accuracy you need with multi-point gas calibration—tailored to your application.
- Trace Source™ Permeation Tubes – Disposable and refillable permeation tubes – for over 550 chemicals.
- Span Pac™ I – Industrial, process GC applications in hazardous atmospheres.
- FlexStream™ – Lab, QA/QC, and research development.
Read More! Use KIN-TEK’s Span Chek™ 2400 Portable Calibration System for portable calibration! “Simplifying Gas Monitor Performance Verification Protocols using a Portable Permeation System” by Danet Vrazel
Border Security
Trace Gas Calibration for Border Protection
Border security check points help keep citizens and environments safe. Gas analyzers are one of many tools used to detect illegal and dangerous chemicals, safeguarding from cross border transport. Calibrating for trace detection with high precision gas analyzers calls for high precision gas standards that are created dynamically using permeation tubes.
KIN-TEK Analytical, Inc. offers Trace Source™ Permeation Tubes to calibrate/validate gas analyzers used in border security. Below are some examples:
- Simulants for Chemical Warfare Agents (CWA) – i.e. Dimethyl methylphosphonate (DMMP), Methyl salicylate (MS), Diisopropyl methylphosphonate (DIMP), etc.
- Explosives and derivatives – Dichloromethane (DCM) and VOCs (used as taggants).
- Illegal Drugs/Narcotics – Ammonia and chemical precursors such as Benzaldehyde and Methylamine
*Contact KIN-TEK for referenced materials.
For More Information or to request a quote, CLICK HERE!
Recertification
Maintain confidence in your calibration data – reach out today.
Don’t risk losing accuracy, reliability, or traceability… KIN-TEK makes it easy to stay compliant. Quick turnaround, detailed reports and updated calibration data at a discount – Recert Now!
Re-establish traceability to NIST and ensure accuracy of gas analyzer calibration by recertifying your KIN-TEK Permeation System and Trace SourceTM Permeation Tubes!
- Recertification renews traceability to the National Institute of Standards and Technology.
- Recertification involves calibration of products using traceable standards and verifying performance specifications, accuracy, and repeatability.
- Recertification of instruments provides “As Found/As Left” Verification Data.
- Recertification gives confidence that all components are functioning properly.
KIN-TEK Analytical, Inc. recommends annual Recertification/Calibration service
for all KIN-TEK manufactured instruments and many permeation devices.
Contact KIN-TEK today to ask about Instrument Recertification and Calibration Services and our Permeation Tube Recertification Services. For more information CLICK HERE!
LCGC Pittcon 2026
Join KIN-TEK at Pittcon 2026 Booth #3130!
KIN-TEK will be featuring the FlexMixer™ – Multi-Gas Blending/Diluting System and the new Span Chek™ 2400 Portable Calibration System.
The FlexMixer™ Multi-Gas Blending/Diluting System mixes or dilutes up to 10 separate gas feeds (or cylinder sources) to one Span Gas output. Controlled by user friendly software installed on the user PC, the FlexMixer™ is an economical and functional solution for a broad range of applications. click for more
The Span Chek™ 2400 is your grab-and-go portable solution for creating accurate, NIST traceable gas standards for calibrating ambient air monitors, detectors, and fence-line systems. It delivers repeatable multi-point concentrations directly at the sensor using up to four Trace Source™ disposable permeation tubes. click for more
Reliable solutions for Analyzers, Detectors, and Sensors
KIN-TEK Analytical, Inc. utilizes Trace Source™ permeation tubes to offer complete solutions for creating custom gases for over 550 gas compounds. Get the accuracy you need with multi-point gas calibration—tailored to your application.
- Trace Source™ Permeation Tubes – Disposable and refillable permeation tubes – for over 550 chemicals.
- Span Pac™ I – Industrial, process GC applications in hazardous atmospheres.
- FlexStream™ – Lab, QA/QC, and research development.
Read More! Use KIN-TEK’s Span Chek™ 2400 Portable Calibration System for portable calibration! “Simplifying Gas Monitor Performance Verification Protocols using a Portable Permeation System” by Danet Vrazel
Data Acquisition in Gas Calibration
The Importance of Data Acquisition in Gas Analyzer Calibration…
Acquiring data to verify the performance of an instrument is vital for traceability and analysis of trends for accuracy, reliability and compliance. Most gas analytical devices have integrated software to capture analytical data for comparison to a saved calibration. However, there are limitations in the ability to directly compare analyzer response data and gas standard values during calibration if a cylinder gas standard is used. Calibration information provided for the cylinder is static and relative to when the cylinder was analyzed not when it is used during calibration so differences may exist that affect overall calibration performance without the user’s knowledge. Actively recording calibration gas data as it is generated creates unique advantages over traditional cylinder gas calibration and is done using a permeation system.
Read more about data acquisition in gas analyzer calibration …
Quick Links!
KIN-TEK FlexLinkTM Software KIN-TEK supplies a Windows® executable program named “FlexLink™” to setup, monitor and control the generation of multi-component concentrations with KIN-TEK’s FlexStream™ gas standards generator.
KIN-TEK FlexStream Gas Standard Generator The KIN-TEK Analytical FlexStream™ System is ideally suited for creating trace concentration – ppm, ppb, and pptr – mixtures. The FlexStream™ uses KIN-TEK Trace Source™ disposable, refillable and diffusion permeation tubes for over 550 Supported Chemicals.
More about the author:
Danet M. Vrazel worked in the Chemical Industry with companies such as Hoechst Celanese and Solutia and did research in the Chemical Pathology Department at UTMB Galveston before working with KIN-TEK in 2001. As a Technical Sales/Service Representative for KIN-TEK, Ms. Vrazel learned techniques for calibrating gas analytical devices using permeation tubes and gas standard generators. Ms. Vrazel has been with KIN-TEK for over 20 years providing gas calibration solutions to the gas analyzer industry and working with customers all over the world. Now as Vice President, Ms. Vrazel uses her business experience and technical expertise to guide business operations.
- « Previous Page
- 1
- 2
- 3
- 4
- …
- 15
- Next Page »
