Ambient Air Monitoring – Dynamically Blending % Level Gases for Calibration Ambient air monitoring plays a critical role in measuring gases that can affect environmental quality, workplace conditions, and public safety. Monitoring stations may measure gases such as NO₂, CO, CO₂, VOCs, SO₂, H₂S, oxygen, and nitrogen across a wide range of concentrations. As sensor and analyzer technology becomes increasingly sensitive, the accuracy of the calibration standard becomes even more important. Without reliable calibration, even
Trace Sulfur Calibration — There’s a Better Way Solving Trace Sulfur Calibration Challenges with Dynamic Gas Standards Accurate trace sulfur calibration is essential across refinery, petrochemical, natural gas, and environmental applications — where even ppbv-level sulfur concentrations can poison catalysts, corrode equipment, and compromise product quality. If you’re relying on compressed gas cylinders for trace sulfur calibration, you’ve likely run into the problem: reactive sulfur compounds adsorb to cylinder walls, degrade at low concentrations, and
Stay in the “GOOD” Zone with Accurate Formaldehyde Monitor Calibration using NIST-Traceable Permeation Tubes Formaldehyde is widely used across industries and can be found in products such as pressed wood, adhesives, pesticides, vinyl flooring, and ceiling tiles. Because long-term exposure can pose health risks, many facilities rely on formaldehyde monitors to help ensure a safe work environment. Many work environments must monitor for the presence of Formaldehyde to minimize employee long term exposure. Area monitors require regular
Calibrate Your Way! Industrial, Portable or Laboratory Applications Provide multi-point calibration for accurate gas analysis. Create custom gas mixtures for process or analytical environments. Over 550 Chemical Gas Standards available to provide complex gas mixtures. Span Chek™ portable calibration of fixed gas detectors Trace Source™ Permeation Tubes – Disposable and refillable permeation tubes – for over 550 chemicals. Span Pac™ I – Industrial, process GC applications in hazardous atmospheres. FlexStream™ – Lab, QA/QC, and research development.
KIN-TEK features the FlexMixer™ – Multi-Gas Blending/Diluting System and the new Span Chek™ 2400 Portable Calibration System. The FlexMixer™ Multi-Gas Blending/Diluting System mixes or dilutes up to 10 separate gas feeds (or cylinder sources) to one Span Gas output. Controlled by user friendly software installed on the user PC, the FlexMixer™ is an economical and functional solution for a broad range of applications. click for more The Span Chek™ 2400 is your grab-and-go portable solution for
Trace Gas Calibration for Border Protection Border security check points help keep citizens and environments safe. Gas analyzers are one of many tools used to detect illegal and dangerous chemicals, safeguarding from cross border transport. Calibrating for trace detection with high precision gas analyzers calls for high precision gas standards that are created dynamically using permeation tubes. KIN-TEK Analytical, Inc. offers Trace Source™ Permeation Tubes to calibrate/validate gas analyzers used in border security. Below are
