Monica Mizell - KIN-TEK Analytical, Inc.

Electronic Gases

June 28, 2020 by Monica Mizell

The electronics industry uses gases for several processes such as etching, cleaning, or deposition. Highly pure and highly accurate gases are needed when manufacturing integrated circuits or creating the right gaseous mixtures. Permeation tubes hold individual components and can be combined to form the right dynamic mixtures for tool chambers when cylinder containment is undesirable.

Chlorine, Arsine, Halocarbons, Ammonia, Phosphine, Germane, Hydrogen fluoride, and Silanes are some of the principal electronic gases that KIN-TEK Analytical, Inc. provides to the electronics industry in pure form using Trace Source™ Permeation Tubes.

KIN-TEK’s list of over 550 pure gas standards likely includes gases to meet your requirements, or contact us, we are widely recognized for providing solutions for the most difficult requirements.

Click For More … Chemical Compound List

Click For More … FlexStream Gas Generator System

Click For More … Trace Source^TM Liquid Filled (LFH) Permeation Tube

Gas Analyzer Research Tools

June 17, 2020 by Monica Mizell

Research and development of gas analyzers often requires significant scientific and engineering effort to fine tune the gas ratios going into the system during development of the analyzer.

This challenge can be greatly simplified by gas generators and calibration devices which can provide gases in complex mixtures in a broad range of conditions including pressure, concentration, flow rates and over 550 chemicals to simulate the target conditions of the analyzer under development.

KIN-TEK can provide a custom system with software, data-logging and advanced features needed to hasten your development gas analyzers.

We have many years of accumulated experience working with leading companies, universities, and research organizations to save time and money in their research programs relating to development of gas detectors, analyzers, and monitors.

Reach out to us with your needs and we will quickly propose a solution to save time and money in your research work.

Click For More … FlexStream Gas Generator System

Click For More … Trace Source^TM Liquid Filled (LFH) Permeation Tube

Click For More … Chemical Compound List

Formaldehyde Monitor Calibration

June 1, 2020 by Monica Mizell

Calibrating Formaldehyde Monitors with Trace Source™ Permeation Tubes

Formaldehyde is used in many industries and found in vinyl flooring, pressed wood products, glues, adhesives, pesticides, ceiling tiles, and other materials.

Many work environments must monitor for the presence of Formaldehyde to minimize employee long term exposure. Area monitors require regular calibration to validate if air is “GOOD” or “BAD”.

Trace Source™ Formaldehyde permeation tubes with a FlexStream™ System will keep you in the “GOOD” zone and provides accuracy and NIST Traceability.

Click For More … FlexStream Gas Generator System

Click For More … Trace Source^TM Liquid Filled (LFH) Permeation Tube

Click For More … Chemical Compound List

BTEX Gas Standards

May 19, 2020 by Monica Mizell

Volatile Organic Compounds (VOCs) are major contributors to pollution and pose a risk to human health.

VOCs are regulated by Federal and State agencies and periodic calibration is required to ensure compliance.

Benzene, Toluene, Ethyl benzene, and total Xylenes (BTEX) are typically analyzed together as key components to provide an overview of VOC concentrations present in the air. Trace Source™ disposable permeation tubes provide NIST traceable calibration standards for accurate calibration of BTEX gas monitors and analyzers.

KIN-TEK Analytical, Inc. supplies highly accurate and NIST Traceable BTEX calibration gas standards.

Contact us for a quote!

For more information

Trace Source™ Disposable Permeation Gas Tubes Product Details
KIN-TEK Trace Source™ Disposable Permeation Tube Brochure (PDF)
About Our Complex Mixtures

Environmental Gas Calibration

September 10, 2019 by Monica Mizell

KIN-TEK Analytical, Inc. Trace Source^TM Permeation Tubes for Environmental Gas Calibration

Regulations related to the analysis of VOC and other common air pollutants, both indoors and out, are increasing. As new analysis and monitoring technologies emerge, the use of sensitive analytical methods require accurate and reliable gas standards for calibration in order to precisely quantify ppb and lower concentrations.

KIN-TEK Analytical, Inc. Trace Source™ Permeation Tubes provide precise gas standards for calibration and/or verification for a variety of analytical & monitoring devices. Whether your analysis is for BTEX, NO_x, SO₂, Hydrocarbons, Formaldehyde or many others, KIN-TEK provides an accurate and safe gas calibration solution.

Click For More … Trace Source™ Permeation Gas Tubes

Trace Moisture Calibration

August 16, 2019 by Monica Mizell

KIN-TEK Analytical, Inc. Span Pac^TM H₂O Gas Standard Generator for Trace Moisture Calibration

Trace water contamination affects product quality in a variety of industries. Calibrating analyzers to detect water at sub-ppm, ppb, and pptr concentrations can be challenging. Trace Source^TM water permeation tubes, used within a KIN-TEK Span Pac^TM H₂O system, provide the controls for adding a precise amount of water to the background carrier gas as utilized in the “standard addition” technique of calibrating for trace moisture concentrations.

KIN-TEK Analytical, Inc. provides the solution for challenging calibrations:

• Span Pac^TM 61 H₂O lab model (>100 ppm to ~100 ppb water concentrations)

• Span Pac^TM 261 H₂O (dual oven system used for dual range concentrations)

• Span Pac^TM 61 H₂O Welded Model (sub-ppm to ~10 ppb concentrations)

• Span Pac^TM 61 H₂O Welded Secondary Dilution Model (ppb to pptr concentration).

Click For More … Span Pac^TM Trace Level H₂O

Volatile Organic Compounds (VOCs) are major contributors to pollution and pose a risk to human health.

Contact us for a quote!

For more information

Distributors and Representatives