The Span Pac™ 61 H2O – Delivering Accurate Trace Moisture Calibration The KIN-TEK Analytical, Inc. Span Pac™ 61 H2O series of moisture specific gas standard generators provide accurate NIST Traceable calibration for applications that require on-line moisture monitoring. Semiconductor manufacturing, specialty gas production, and industrial gas operations must quantify the level of moisture present (or verify the absence of moisture) in the product, sometimes at various stages of industrial gas purification. Trace moisture calibration is
Are you monitoring emissions or conducting atmospheric research for greenhouse gases? The increase in atmospheric studies and regulations drives the need for accurate analysis of greenhouse gases. KIN-TEK Analytical, Inc. offers calibration solutions to create trace greenhouse gases using Trace Source™ Permeation Tube Technology & the FlexStream™ Gas Standard Generator System. To certify or bump test equipment that monitors or analyzes greenhouse gases, KIN-TEK Trace Source™ Permeation Tubes offer NIST Traceable gas standards such as CO2, Methane, Moisture, Fluorinated Carbons, and more. For scientific
Ammonia (NH3) produced by agricultural and industrial processes is a gas pollutant and is detected at ppbv to ppmv levels in the atmosphere. Ammonia is also a biomarker for breath analysis to detect medical issues such as kidney disease at ppbv and lower concentrations. No matter the application for detecting trace NH3, dynamically creating the calibration gas in real time with KIN-TEK equipment and gas standards improves measurement accuracy and reduces loss of analyte from
KIN-TEK Permeation Tubes, together with a Gas Standard Generator, are used to generate highly accurate and safe gas standards and mixtures for calibration in the ppm, ppb, and pptr ranges. Permeation tubes are a proven method for using fundamental standards to create gas standards that are traceable to NIST. These small tubes can make a big impact in your lab. They save space, are easy to use, easy to handle, and many are disposable when
KIN-TEK FlexStream™Gas Standard Generators The KIN-TEK Analytical FlexStream™ System is ideally suited for creating trace concentration – ppm, ppb, and pptr – gas mixtures. The FlexStream™ uses KIN-TEK Trace Source™ disposable, and refillable permeation tubes for over 550 Supported Chemicals (Diffusion Tubes are also available). WATCH THE VIDEO BELOW TO SEE HOW EASY IT IS TO SETUP YOUR FLEXSTREAM DILUTION GAS …. KIN-TEK supplies a Windows® application named FlexLink™ with each FlexBase module. This program controls and monitors
HOW PERMEATION TUBES WORK! KIN-TEK Trace Source™permeation tubes use a permeable membrane to dispense a small flow of chemical vapor. The most common type is a small tubular device that has liquid analyte sealed inside the tube. A very small but stable flow (nanograms-per-minute) of analyte vapor is emitted through the tube wall at constant temperature. The emission rate of the tube is determined by measuring the rate of weight loss. These tubes are used in KIN-TEK
