CALIBRATE YOUR WAY! Dependable Gas Calibration for your Analyzers, Detectors, and Sensors KIN-TEK Industrial Gas Standard Generators with Trace Source™permeation tubes are used in industrial environments to deliver calibration gas standards directly to your process GC, GC-MS, or any type of gas analyzer. Provide multi-point calibration for accurate gas analysis. Span PacTM I for industrial, process GC applications in Nema 4 Hazardous Atmospheres. FlexStreamTM for Laboratory, QA/QC. Create custom gas mixtures for process or analytical environments.
Calibrate for Trace Moisture in Electronic Specialty Gases Challenge: Semiconductor chips are used in a variety of electronics such as smartphones, military equipment, vehicles, and healthcare equipment. The production of semiconductor chips requires the use of high purity Electronic Specialty Gases (ESG) that should be free of trace contaminants such as moisture. The ubiquitous nature of trace moisture makes it challenging to calibrate and test for contaminant levels in ESG. To mitigate risk of damage to semiconductor
Flexible automated solutions for dynamically blending gases to achieve high ppm to % concentration gas mixtures. Challenge: KIN-TEK Analytical, Inc. (KIN-TEK) provides trace gas calibration solutions to the gas analyzer, sensor, and detector industry using permeation tubes and gas standard generators. Permeation tubes are a proven, accurate, and traceable solution for creating trace concentration ranges (ppm to pptr) since the pure permeating gas can be accurately diluted to create lower concentrations. However, generating percent (%) concentration
KIN-TEK Industrial Gas Standard Generators with Trace Source™permeation tubes are used in industrial environments to deliver calibration gas standards directly to your process GC, GC-MS, or any type of gas analyzer. Typically a gas standard generator such as the FlexStreamTM or 491FlexTM Base Module is used routinely, or intermittently for creating gas standards for different applications. Most permeation tubes require several hours for the emission rate to stabilize from storage or from a temperature change.
CALIBRATE YOUR WAY! Dependable On-line Gas Calibration for your process GC, area monitors, sensors, or on-line analyzers. KIN-TEK Industrial Gas Standard Generators with Trace Source™permeation tubes are used in industrial environments to deliver calibration gas standards directly to your process GC, GC-MS, or any type of gas analyzer. The Span Pac™ I Gas Standard Generator System dynamically creates trace gas standards for on-line calibration of process analyzers for over 550 chemicals, capable of generating NIST traceable gas
Calibrate your way using KIN-TEK Trace Source™ Permeation Tube technology combined with KIN-TEK’s EcoFlex™ Standalone gas standard system, 491Flex™ manually operated expandable system, or KIN-TEK’s fully automated and expandable FlexStream™ System. Accurate sub-ppm to pptr gas concentrations for calibrating GC, GC-MS, or other devices. Multiple gases and a multipoint calibration curve generated using Trace Source™ Permeation Tubes in a KIN-TEK Gas Standard Generator. 550+ NIST-traceable gas compounds available to provide complex gas mixtures. Modular configurations provide interchangeable and
