The table below lists the latest software upgrades and User’s Manual for various KIN-TEK products.
Generally, the installed firmware version can be obtained from the touchscreen or other display panel of the instrument. Similarly, the version of the computer-hosted (PC) software application can be obtained from the “about” box of the application.
Please check your installed version against the table below. From this list, you should be able to determine whether you need to upgrade your software. If you do not have the latest version, then contact KIN-TEK to determine if you need to upgrade your software.
KIN-TEK recommends that all FlexStream™ instruments be upgraded to Version 3.6 or later.
|
Item |
Product Description |
Latest Software Version |
User’s Manual Version |
| 1 | AutoBlend™ Firmware | 2.01 | 1.0 |
| 2 | AutoBlend™ Scenario Analyzer Software | 1.05 | 2.1 |
| 3 | AutoBlend™ Server Software | 1.05 | 2.1 |
| 4 | AutoBlend™ Remote Access Software | 1.1 | 1.0 |
| 5a | FlexStream™ Firmware / Touchscreen HMI5043N | 3.1 / 3.0a | 2.0 |
| 5b | FlexStream™ Firmware / Touchscreen HMI504T | 3.1 / 3.0 | 2.0 |
| 6 | FlexStream™ Software Upgrade Guide | n/a | 1.4 |
| 7 | FlexStream™ Modbus Driver | 1.1 | Not released |
| 8 | FlexLink™ Software | 1.5 | 1.2 |
Note: The above table was last updated May 8, 2012.
FlexStream™ Software Upgrade
Please let us know if you would like to upgrade the firmware of the FlexStream™ instrument. We will then send you additional information. Basically, the upgrade process requires a cable kit which we can loan you (or which you can purchase), and a Software Upgrade Guide. Or you can return the FlexStream™ Base module (FlexBase) and KIN-TEK will do the upgrade for free (you pay two-way shipping costs).
Or, if you wish for a KIN-TEK representative to perform the upgrade at your facility, then please contact our Technical Services department.
