The Model CO395Flex™ Certification Oven is a stand alone version of the permeation tube oven used in the KIN-TEK 491Flex™, Modular Gas Standards Generating System. Permeation tubes require several hours for the emission rate to stabilize after a temperature change. This can be a challenge if the Gas Generator is used intermittently or switched between applications. The CO395 is a compact, economical unit designed to maintain permeation tubes in a constantly equilibrated state, ready for immediate use in each application. This feature is especially useful for standards laboratories where the weight loss rate of the tube(s) is continually monitored to insure accuracy, or when permeation tubes are unexpectedly needed to trouble shoot an analyzer. It also saves hours of calibration time by providing pre-heated tubes ready for immediate use. CLICK HERE TO VIEW PRODUCT BROCHURE (PDF) Features The CO395Flex™ features open frame construction for easy access to the permeation tube. An on board constant- differential-pressure flow controller insures constant flow over the permeation tube. Temperature can be controlled at any value from approximately 30°C (at least 5°C above ambient temperature) to 150°C. Temperature settings are NIST traceable to ±0.1°C to insure minimum upset when changing applications. Technical Information Dimensions: 9” wide X 5 1/4” deep X 8” high Weight: Approx. 5 1/2 lb. Power: 115 V, 1 A peak (230V optional) Temperature Range: Typically 30° (5°C above ambient) to 150°C; digitally set in 0.1°C increments. (no temperature indication) Flow: Typically 100 cc/min. Adjustable from 20 cc/min. to 200 cc/min. (no flow indication) Tube Capacity: Accepts disposable permeation tubes, KIN-TEK refillable tubes, and diffusion tubes. Holds up to 8 disposable tubes, one refillable tube, or 1-2 diffusion tubes. … [Read more...]
Certification Oven 395Flex
The Model CO395Flex™ Certification Oven is a stand alone version of the permeation tube oven used in the KIN-TEK 491Flex™, Modular Gas Standards Generating System. CLICK HERE TO VIEW PRODUCT BROCHURE (PDF) Permeation tubes require several hours for the emission rate to stabilize after a temperature change. This can be a challenge if the Gas Generator is used intermittently or switched between applications. The CO395 is a compact, economical unit designed to maintain permeation tubes in a constantly equilibrated state, ready for immediate use in each application. This feature is especially useful for standards laboratories where the weight loss rate of the tube(s) is continually monitored to insure accuracy, or when permeation tubes are unexpectedly needed to trouble shoot an analyzer. It also saves hours of calibration time by providing pre-heated tubes ready for immediate use. Features The CO395Flex™ features open frame construction for easy access to the permeation tube. An on board constant- differential-pressure flow controller insures constant flow over the permeation tube. Temperature can be controlled at any value from approximately 30°C (at least 5°C above ambient temperature) to 150°C. Temperature settings are NIST traceable to ±0.1°C to insure minimum upset when changing applications. Technical Information Dimensions: 9” wide X 5 1/4” deep X 8” high Weight: Approx. 5 1/2 lb. Power: 115 V, 1 A peak (230V optional) Temperature Range: Typically 30° (5°C above ambient) to 150°C; digitally set in 0.1°C increments. (no temperature indication) Flow: Typically 100 cc/min. Adjustable from 20 cc/min. to 200 cc/min. (no flow indication) Tube Capacity: Accepts disposable permeation tubes, KIN-TEK refillable tubes, and diffusion tubes. Holds up to 8 disposable tubes, one refillable tube, or 1-2 diffusion tubes. … [Read more...]
CO 395Flex Brochure | KIN-TEK
Solutions
Below are several KIN-TEK solutions that have KIN-TEK Trace Source™ Disposable and Refillable Permeation Tubes and Gas Standards Generators. Perhaps your application is in one of these areas: … [Read more...]
Span Chek 8700 Brochure | KIN-TEK
Span Pac H2O Brochure | KIN-TEK
Span Pac H2O … [Read more...]
Span Pac I Brochure | KIN-TEK
EcoFlex™ Permeation System Brochure | KIN-TEK
491Flex Brochure | KIN-TEK
FlexStream: KIN-TEK’s Automated Permeation Tube Brochure | KIN-TEK
Distribute, Represent, or Resell KIN-TEK Products
Jobs/ Employment/ Careers
KIN-TEK Analytical, Inc. is a small growing company that seeks innovative, motivated, and conscientious employees who can contribute to the company’s growth. Employees work directly with management and have an opportunity to see all aspects of the business including research and product development, manufacturing, product quality, marketing, sales, customer support, technology, and finance. We continually seek new employees to meet our staffing requirements as we take new initiatives to continue our growth. If you are interested in employment with KIN-TEK please send your contact information and current resume for consideration to: Human Resources Email: hr@kin-tek.com We are an equal opportunity employer All qualified applicants will receive consideration for employment without regard to race, creed, religion, color, national or ethnic origin, citizenship, sex, sexual orientation, gender identity and expression, genetic information, veteran status, age or disability status. … [Read more...]
Liquid Filled (LFH)
Liquid Filled Permeation Tubes Generates moderate to high concentration mixtures of low vapor pressure liquids such as acrylonitrile, benzene, methanol and water. Are usually filled by KIN-TEK before shipment but may be filled by the customer (with appropriate safety measures in place) for certain components (contact the Factory). Tube dimensions: 1¾ inch diameter by 6 inch height plus approx. 2 inch height of protruding tubing. … [Read more...]
- 1
- 2
- 3
- 4
- Next Page »
